※上記の広告は60日以上更新のないWIKIに表示されています。更新することで広告が下部へ移動します。

「BIOS」の編集履歴(バックアップ)一覧はこちら

BIOS」の最新版変更点

追加された行は青色になります。

削除された行は赤色になります。

 -黒字…初期値にリストアした場合の設定値
 -&color(blue){青字}…推奨される設定変更値および解説
 -&color(red){赤字}…注意事項または注釈
 
 ※ 誤記や補足説明などありましたら更新お願いします。
 ※ 設定変更などでパフォーマンス向上や不具合回避報告がありましたら更新お願いします。
 ※ 任意のバージョンへのアップグレード・ダウングレードは対象のアップデータの実行で可能です。
 ※ 書き換えに失敗した場合(コンソール赤背景)は再度実行することで修復出来る事があります。
 
 
 
 #region(open,BIOS項目一覧 2016/11/18版)
 *BIOS項目一覧(2016/11/18版)
 //========== Main ==========
 #region(close,Main)
 *Main
 |>|>|&bold(){BIOS Infomation}|
 |BIOS Vendor|American Megatrends||
 |Core Version|5.011||
 |Compliancy|UEFI 2.4; PI 1.3||
 |Project Version|1ARXP 0.57 x64||
 |Build Date and Time|18/11/2016 16:29:41|&color(red){11/18版の表示}|
 |>|>|&bold(){CPU Configuration}|
 |Microcode Patch|362||
 |>|>|&bold(){Memory Information}|
 |Total Memory|4096 MB (DDR3)||
 |>|>|&bold(){GOPInformation}|
 |Intel(R) GOP Driver|8.0.1038||
 |>|>|&bold(){TXE Information}|
 |Sec RC Version|00.05.00.00||
 |TXE FW Version|02.00.02.3095||
 |>|>|-|
 |System Language|[English]||
 |>|>|-|
 |System Date|&italic(){[ddd MM/DD/YYYY]}||
 |System Time|&italic(){[hh:mm:ss]}||
 |>|>|-|
 |Accsess Level|Administrator||
 #endregion
 //==========Boot==========
 #region(close,Boot)
 *Boot
 |>|>|&bold(){Boot Configuration}|
 |Setup Prompt Timeout|1||
 |Bootup NumLock State|[On]||
 |>|>|-|
 |Quiet Boot|[Enabled]||
 |Fast Boot|[Enabled]||
 | SATA Support|[All Sata devices]||
 | VGA Support|[EFI Driver]||
 | USB Support|[Partial Initial]||
 | PS2 Support|[Disabled]||
 | Network Stack Driver|[Disabled]||
 |>|>|-|
 |>|>|&bold(){Boot Option Priorities}|
 |Boot Option #1|Windows Boot Manager||
 |Boot Option #2|UEFI: Built-in EFI …||
 #endregion
 //==========Save&Exit==========
 #region(close,Save&Exit)
 *Save&Exit
 |Save Changes and Exit|&color(red){設定後は保存して終了}|
 |Discard Changes and Exit||
 |Save Changes and Reset||
 |Discard Changes and Exit||
 |>|-|
 |>|&bold(){Save Options}|
 |Save Changes||
 |Discard Changes||
 |Restore Default||
 |Save as User Defaults||
 |Restore User Defaults||
 |>|-|
 |>|&bold(){Boot Override}|
 |UEFI: Built-in EFI Shell||
 |Windows Boot Manager||
 |Launch EFI Shell from filesystem device||
 |Reset System with ME disable Mode||
 #endregion
 #endregion
 
 #region(open,BIOS項目一覧 2016/10/25版)
 *BIOS項目一覧(2016/10/25版)
 //========== Main ==========
 #region(close,Main)
 *Main
 |>|>|&bold(){BIOS Infomation}|
 |BIOS Vendor|American Megatrends||
 |Core Version|5.011||
 |Compliancy|UEFI 2.4; PI 1.3||
 |Project Version|1ARXP 0.57 x64||
 |Build Date and Time|10/25/2016 10:43:29|&color(red){10/25版の表示}|
 |>|>|&bold(){CPU Configuration}|
 |Microcode Patch|362||
 |>|>|&bold(){Memory Information}|
 |Total Memory|4096 MB (DDR3)||
 |>|>|&bold(){GOPInformation}|
 |Intel(R) GOP Driver|8.0.1038||
 |>|>|&bold(){TXE Information}|
 |Sec RC Version|00.05.00.00||
 |TXE FW Version|02.00.02.3095||
 |>|>|-|
 |System Language|[English]||
 |>|>|-|
 |System Date|&italic(){[ddd MM/DD/YYYY]}||
 |System Time|&italic(){[hh:mm:ss]}||
 |>|>|-|
 |Accsess Level|Administrator||
 #endregion
 //==========Advanced==========
 #region(close,Advanced)
 *Advanced
 //-----Trusted Compuring-----
 #region(close,Trusted Compuring)
 &bold(){Trusted Compuring}
 |>|>|TPM20 Device Found|
 |>|>|-|
 |Security Device Sup|[Enabled]||
 |Active PCR banks|S||
 |Available PCR Banks|S||
 |>|>|-|
 |TPM State|[Enabled]||
 |Pending Operation|[None]||
 |Platform Hierarchy|[Enabled]||
 |Storage Hierarchy|[Enabled]||
 |Endorsement Hierarc|[Enabled]||
 |TPM2.0 UEFI Spec Ve|[1.0]||
 |TPM 20 InterfaceTyp|[CRB]||
 |Device Select|[Auto]||
 #endregion
 //-----ACPI Setting-----
 #region(close,ACPI Setting)
 &bold(){ACPI Setting}
 |Enable ACPI Auto Conf|[Enabled]||
 #endregion
 //-----Serial Port-----
 #region(close,Serial Port)
 &bold(){Serial Port}
 |>|>|&bold(){COM 0}|
 |Console Redirection|[Disabled]||
 |>|>|Condole Redirection Settings|
 |>|>|-|
 |>|>|&bold(){Legacy Console Redirection}|
 |>|>|Legacy Console Redirection Settings|
 |>|>|-|
 |>|>|&bold(){Serial Port for Out-ofBand Management/&br()Windows Emergency Management Service (EMS)}|
 |Console Redirection|[Disabled]||
 |>|>|Console Redirection Settings|
 #endregion
 //-----CPU Configuration-----
 #region(close,CPU Configuration)
 &bold(){CPU Configuration}
 |>|>|&bold(){Socket 0 CPU Infomation}|
 |Intel(R) Atom(TM) x7-Z8700 CPU @ 1.60GHz||&color(blue){先行機種一部はx7-Z8750あり}|
 |>|>|-|
 |CPU Signature|406c3||
 |Microcode Patch|362||
 |Max CPU Speed|1600 MHz||
 |Min CPU Speed|480 MHz||
 |ProcessorCores|4||
 |Intel HT Technology|Not Supported||
 |Intel VT-x Technology|Supported||
 |>|>|-|
 |L1 Data Cache|24 kB x 4||
 |L2 Data Cache|32 kB x 4||
 |L2 Cache|1024 kB x 2||
 |L3 Cache|Not Supported||
 
 |>|>|&bold(){CPU Thermal Configuration}|
 |DTS|[Disabled]||
 
 |CPU Speed|1600 MHz||
 |64-bit|Supported||
 |>|>|-|
 |Limit CPUID Maximum|[Disabled]||
 |Bi-directional PROCHO|[Enabled]||
 |Intel Virtualization|[Enabled]||
 |Power Technology|[Energy Efficient]||
 #endregion
 //-----PPM Configuration-----
 #region(close,PPM Configuration *)
 **PPM Configuration
 |EIST|Enabled||
 |CPU C State Report|Enabled||
 |Max CPU C-state|C7&color(blue){→C6またはC1}|&color(blue){10/25より前のBIOSではスリープ中の電源断回避可能}|
 |SOix|Enabled||
 #endregion
 //-----Thermal-----
 #region(close,Thermal)
 &bold(){Thermal}
 |>|>|&bold(){Thermal Configuration}|
 |>|>|Thermal Configuration Parameters&br()Dynamic Platform&Thermal Framework|
 |DPTF|[Enabled]||
 |>|>|-|
 |Intel® DPTF Processor|[Enabled]||
 |Critical Trip Point|[90 C]||
 |Passive Trip Point|[85 C]||
 |>|>|-|
 |>|>|Intel® DPTF Skin Hotspot Proxy Senser|
 |Intel® DPTF Skin Hots|[Enabled]||
 |Critical|[90 C]||
 |Passive|[57 C]||
 |>|>|-|
 |>|>|Intel® DPTF Ambient Estimation Participant|
 |Intel® DPTF Ambient E|[Disabled]||
 |Critical|[85 C]||
 |Passive|[52 C]||
 |>|>|-|
 |>|>|Intel® DPTF Charger-Display Senseor Participa...|
 |Intel® DPTF Changes-d|[Enabled]||
 |Critical|[85 C]||
 |Passive|[52 C]||
 |>|>|-|
 |>|>|Intel® DPTF Charger Bord Senser Participant|
 |Charger Board Sensor|[Disabled]||
 |Critical|[85 C]||
 |Passive|[61 C]||
 |>|>|-|
 |>|>|Intel® DPTF Charger Participant|
 |Intel® DPTF Charger P|[Enabled]||
 |>|>|Intel® DPTF Display Participant|
 |Intel® DPTF Display P|[Enabled]||
 |Display High Limit|100||
 |Display Low Limit|40||
 |>|>|Intel® DPTF Power Participant|
 |Intel® DPTF Power Par|[Enabled]||
 |>|>|-|
 |>|>|Intel® Ambient Temperture Participant|
 |Intel® Ambient Temper|[Enabled]||
 |Ambient Constant Sign|[+]||
 |Ambient Constant 0|30||
 |Ambient Constant Sign|[+]||
 |Ambient Constant 1|30||
 |Ambient Constant Sign|[+]||
 |Ambient Constant 2|30||
 |Ambient Constant Sign|[+]||
 |Ambient Constant 3|0||
 |Ambient Constant Sign|[+]||
 |Ambient Constant 4|0||
 |Ambient Constant Sign|[+]||
 |Ambient Constant 5|0||
 |>|>|-|
 |>|>|Ambient Based Trip Point Change|
 |Ambient Based Trip Po|[Enabled]||
 |>|>|Allow High Performance|
 |Allow High Performanc|[Disabled]||
 |Intel® Dynamic Power|[Enabled]||
 |Current Logical Proce|[Disabled]||
 |Start P-State|[P0]||
 |Step Size|[25%]||
 |CLPM|[OS level]||
 |>|>|-|
 |Supper Debug|[Disabled]||
 |>|>|-|
 |>|>|WWAN Participant|
 |Enable/Disable WWAN P|[Disabled]||
 |WWAN Device Critical|[75 C]||
 |WWAN Device Passive T|[40 C]||
 |>|>|-|
 |>|>|Thermal Sampling Period for STR2|
 |Sampling Period Value|300||
 |>|>|-|
 |>|>|Memory Participant|
 
 |>|>|&bold(){Thermal Failsafe Settings}|
 |BatteryId DBI Base|240||
 |BatteryId Analog Base|19||
 |VBattery Threshold|3700||
 |CAP_Freq_Index|4||
 |>|>|-|
 |PROCHOT# input|[Disabled]||
 |Thermal Throttling Me|[Disabled]||
 |>|>|Soc AUX3 Threshold|
 |HOT (TJ_TARGET) Offse|3||
 |>|>|Platform AUX3 Thresholds|
 |Systherm 0 (Skin Hots|110||
 |Systherm 1 (Ambient E|110||
 |Systherm 2 (Changer-D|110||
 |>|>|Platform Critical Thermal Event|
 #endregion
 //-----Android-----
 #region(close,Android)
 &bold(){Android}
 |IA_APPS_RUN|3400||
 |IA_APPS_CAP|0||
 |USE IA_APPS_RUN or CA|[IA_APPS_RUN]||
 |Boot on invalid batte|[Enabled]||
 |Modem Selection|[7262_ES2XX_SSIC]||
 |>|>|-|
 |>|>|Silent Lake Feature Configuration|
 |Silent Lake|[Disabled]||
 #endregion
 //-----PCI Subsystem Setting-----
 #region(close,PCI Subsystem Setting)
 &bold(){PCI Subsystem Setting}
 |>|>|AMI PCI Driver Version : A5.01.08|
 |>|>|PCI Settings Common for all Devices:|
 |Above 4G Decoding|[Disabled]||
 |SR-IOV Supported|[Disabled]||
 |Restore PCIE Register|[Disabled]||
 |Don't Reset VC-TC Map|[Disabled]||
 |>|>|-|
 |>|>|Change Settings og The Following PCI Devices:|
 |>|>|-|
 |>|>|WARNING: Changing PCI Device(s) settings may&br()have unwanted side effects! System May Haqng!&br()PROCEED WITH CAUTION.|
 #endregion
 //-----USB Configutation-----
 #region(close,USB Configutation)
 &bold(){USB Configuration}
 |USB Module Version|11||
 |USB Controllers:|1 XHCI||
 |USB Devices:|2 keybords, 2 Mice||
 |>|>|-|
 |XHCI Hand-off|[Enabled]||
 |USB Mass Strage Driver|[Enabled]||
 |>|>|-|
 |>|>|USB hardware delays a|
 |USB transfer time-out|[20 sec]||
 |Device reset time-out|[20 sec]||
 |Device power-up delay|[Auto]||
 #endregion
 //-----Platform Trust Technology-----
 #region(close,Platform Trust Technology)
 &bold(){TPM Configuration}
 |fTPM|[Enabled]||
 #endregion
 //-----Security Configuration-----
 #region(close,Security Configuration)
 |未作成|||
 #endregion
 //-----System Component-----
 #region(close,System Component *)
 **System Component
 |PMIC ACPI OBJECT|[Enabled]||
 |Asset SLP_SOIX_N in S|[Auto]||
 |>|>|PCIe based WLAN module - BCM4356|
 |BCM4356|[Disabled]||
 |>|>|-|
 |Power&Perfomance(PNP|[Power&Performance]||
 |LPC Pins PNP Setting|[Disabled]||
 |XDB GPIO|[Disabled]||
 |Flashless Modem|[Disabled]||
 |MS Custom Sdbus Drive|[Enabled]||
 |Toggle SelfClockDisab|[Disabled]||
 |AOS GPS HID Selection|[Broadcom 47521 GPS]||
 |CHT-HR setup options|[Disabled]||
 |VGG 50mW Workaround|[Enabled]||
 |OS IMAGE ID|[Windows 8.1]||
 |PSS Storage|[Disabled]||
 |>|>|-|
 |S5-Charging driver|[Enabled]&color(blue){→[Disabled]}|Enabled:シャットダウン(or再起動)&電源接続時にチャージ画面が出る(&color(red){高速充電対応})&br()→&color(red){[Ctrl]+[Alt]+{Del]で起動}&br()&color(blue){Disabled}:&color(blue){電源接続してもチャージ画面にならない(すぐ起動できる)}|
 |S5 LPM Settings|[Disabled]&color(blue){→[Enabled]}|&color(blue){電源オフ時も充電可能になる}|
 |>|>|-|
 |Persistent RAM size|[Disabled]||
 |Offline Crash Dump se|[Disabled]||
 #endregion
 #endregion
 //-----Chipset-----
 #region(close,Chipset)
 *Chipset
 //-----North Bridge-----
 #region(close,North Bridge)
 |>|>|&bold(){North Bridge}|
 |>|>|GOP Configuration|
 |GOP Driver|[Enabled]||
 |>|>|-|
 |>|>|Intel IGD Configuration|
 |Integrated Graphics D|[Enabled]||
 |>|>|-|
 |IGD Turbo Enable|[Enabled]||
 |Power Meter Lock|[Enabled]||
 |Primary Display|[Auto]||
 |GFX Boost|[Disabled]||
 |PR3 (For Win10 Only)|[Enabled]||
 |DVMT Pre-Allocated|[32M]||
 |DVMT Total Gfx Mem|[Max]||
 |Apeture Size|[512MB]||
 |GTT Size|[8MB]||
 |IGD Thermal|[Disabled]||
 |Spread Spectrum clock|[Disabled]||
 |Panel Configuration|[MIPI]||
 |MIPI Panel Vender|[LG MIPI]||
 |>|>|-|
 |ISP Enable/Disable|[Enabled]||
 |ISP PCI Device Select|[ISP PCI Device as BO...]||
 #endregion
 #endregion
 //==========Security==========
 #region(close,Security)
 *Security
 |未作成|||
 #endregion
 //==========Boot==========
 #region(close,Boot)
 *Boot
 |>|>|&bold(){Boot Configuration}|
 |Setup Prompt Timeout|1||
 |Bootup NumLock State|[On]||
 |>|>|-|
 |Quiet Boot|[Enabled]||
 |Fast Boot|[Enabled]||
 | SATA Support|[All Sata devices]||
 | VGA Support|[EFI Driver]||
 | USB Support|[Partial Initial]||
 | PS2 Support|[Disabled]||
 | Network Stack Driver|[Disabled]||
 |>|>|-|
 |>|>|&bold(){Boot Option Priorities}|
 |Boot Option #1|Windows Boot Manager||
 |Boot Option #2|UEFI: Built-in EFI …||
 #endregion
 //==========Save&Exit==========
 #region(close,Save&Exit)
 *Save&Exit
 |Save Changes and Exit|&color(red){設定後は保存して終了}|
 |Discard Changes and Exit||
 |Save Changes and Reset||
 |Discard Changes and Exit||
 |>|-|
 |>|&bold(){Save Options}|
 |Save Changes||
 |Discard Changes||
 |Restore Default|&color(red){他項目設定前に実施。}|
 |Save as User Defaults||
 |Restore User Defaults||
 |>|-|
 |>|&bold(){Boot Override}|
 |UEFI: Built-in EFI Shell||
 |Windows Boot Manager||
 |Launch EFI Shell from filesystem device||
 |Reset System with ME disable Mode||
 #endregion
 #endregion
 
 #region(open,BIOS項目一覧 2016/10/18版)
 *BIOS項目一覧(2016/10/18版)
 //========== Main ==========
 情報無し
 #endregion
 
 #region(open,BIOS項目一覧 2016/09/29版)
 *BIOS項目一覧(2016/09/29版)
 //========== Main ==========
 情報無し
 #endregion
-
-
-- うちのGPD WINには10/18版BIOSが入っていました。Mainの項目では、Build Date and Timeが 10/18/2016 17:43:44となっているほかは10/25版と同じでした。  -- 名無しさん  (2017-01-16 16:53:57)
-- 12/23/2016版なんだけどACアダプタつないだままだと電源ONできなくて困ってる  -- 名無しさん  (2017-02-20 02:49:19)
-- FAQぐらい読めや  -- 名無しさん  (2017-02-22 00:05:22)
-- これほど頭悪い奴はずっと困ってればいいんだよ。  -- 名無しさん  (2017-02-22 18:09:02)
-- 2017/2/21版についての記載を誰か  -- 名無しさん  (2017-04-19 08:09:25)
-- 2017/2/21版のBIOSってどこにあるの?公式探ってるが見つからない  -- 名無しさん  (2017-04-20 02:30:13)
-#comment
最終更新: