「hsrp設定　Cisco」の編集履歴（バックアップ）一覧はこちら

hsrp設定　Cisco - (2009/04/06 (月) 01:06:58) の１つ前との変更点

追加された行は緑色になります。

削除された行は赤色になります。

router1
 r1#conf t
 Enter configuration commands, one per line.  End with CNTL/Z.
 r1(config)#interface Ethernet2/0
 r1(config-if)# ip address 192.168.1.11 255.255.255.0
 r1(config-if)# standby ip 192.168.1.10 ←仮想IP
 r1(config-if)# standby priority 95　←優先度低

router2
 r2#conf t
 Enter configuration commands, one per line.  End with CNTL/Z.
 r2(config)#interface Ethernet2/0
 r2(config-if)# ip address 192.168.1.12 255.255.255.0
 r2(config-if)# standby ip 192.168.1.10 ←仮想IP
 r2(config-if)# standby priority 100 ←優先度高
 r2(config-if)# standby preempt ←優先度高が復旧した場合Activeに戻る

r1#sh standby
 Ethernet2/0 - Group 0
  Local state is Standby, priority 95
  Hellotime 3 sec, holdtime 10 sec
  Next hello sent in 1.668
  Virtual IP address is 192.168.1.10 configured
  Active router is 192.168.1.12, priority 100 expires in 8.272
  Standby router is local
  18 state changes, last state change 00:25:25

r2#sh standby
Ethernet2/0 - Group 0
  Local state is Active, priority 100, may preempt
  Hellotime 3 sec, holdtime 10 sec
  Next hello sent in 0.752
  Virtual IP address is 192.168.1.10 configured
  Active router is local
  Standby router is 192.168.1.11 expires in 8.212
  Virtual mac address is 0000.0c07.ac00
  6 state changes, last state change 00:24:52