「dynagen Cisco」の編集履歴(バックアップ)一覧に戻る
http://sourceforge.net/ [Windows Installer Package]をダウンロード
http://www.winpcap.org/ [WinPcap auto-install(driver +DLLs)]をダウンロード
http://www.ipflow.utc.fr/blog/ Windows系であれば[Windows XP and 2000]をダウンロード
C:\Program Files\Dynamips\images
# Simple lab [localhost]
#[[7200]] ←今回はC7200を使わないのでコメントアウト #image = \Program Files\Dynamips\images\c7200-jk9o3s-mz.124-7a.image # On Linux / Unix use forward slashes: # image = /opt/7200-images/c7200-jk9o3s-mz.124-7a.image #npe = npe-400 #ram = 160 [[3640]] ←3640のイメージを使う。IOSイメージの場所とRAMを定義 image = \Program Files\Dynamips\images\c3640.bin ram = 64 [[ROUTER R1]] ←1台目のルータ(R1)を定義 s1/0 = R2 s1/1 ←R1のs1/0をR2のs1/1に接続 e2/0 = NIO_gen_eth:\Device\NPF_{*****************} ←e2/0は実NIC(ローカル エリア接続 4)に接続※やり方は後述 # Name : ローカル エリア接続 4 slot2 = NM-4E ←スロット2に4ポートEtherを接続 #NM-1FE-TX (FastEthernet x 1port)、NM-1E (Ethernet x 1port)、NM-4E (Ethernet x 4ports)、NM-4T (Serial x 4ports) model = 3640 ←モデルは3640(デフォルトは7200) [[router R2]] s1/0 = R3 s1/1 slot2 = NM-4E model = 3640 [[router R3]] s1/0 = R4 s1/1 slot2 = NM-4E model = 3640 [[router R4]] s1/0 = R5 s1/1 slot2 = NM-4E model = 3640 [[ROUTER R5]] s1/0 = R6 s1/1 e2/0 = NIO_gen_eth:\Device\NPF_{********************} #Name : ローカル エリア接続 5 slot2 = NM-4E model = 3640 [[router R6]] s1/0 = R7 s1/1 slot2 = NM-4E model = 3640 [[router R7]] s1/0 = R8 s1/1 slot2 = NM-4E model = 3640 [[router R8]] s1/0 = R1 s1/1 slot2 = NM-4E model = 3640
*※実NICの確認方法
Network adapters on this machine: NIO_gen_eth:\Device\NPF_{B03F2B6D-C15F-4412-A9BF-09F93E676D92} Name : ローカル エリア接続 4 Desciption: Realtek RTL8169" NIO_gen_eth:\Device\NPF_{**************************} Name : ローカル エリア接続 5 Desciption: Realtek RTL8169" NIO_gen_eth:\Device\NPF_{**************************} Name : ローカル エリア接続 3 Desciption: Realtek RTL8169" NIO_gen_eth:\Device\NPF_{**************************} Name : ローカル エリア接続* 6 Desciption: MS Tunnel Interface Driver Use as follows: F0/0 = NIO_gen_eth:\Device\NPF_{...} 続行するには何かキーを押してください . . .
Reading configuration file... *** Warning: Starting R4 with no idle-pc value *** Warning: Starting R5 with no idle-pc value *** Warning: Starting R6 with no idle-pc value *** Warning: Starting R7 with no idle-pc value *** Warning: Starting R1 with no idle-pc value *** Warning: Starting R2 with no idle-pc value *** Warning: Starting R3 with no idle-pc value *** Warning: Starting R8 with no idle-pc value Network successfully loaded Dynagen management console for Dynamips and Pemuwrapper 0.11.0 Copyright (c) 2005-2007 Greg Anuzelli, contributions Pavel Skovajsa => telnet R1 (R1のコンソール画面が起動します。) (もしくは、[telnet /all]で全てのルータのコンソールが起動します。) (全て切断するときは[exit])