アットウィキロゴ

juniper > srx100

購入 SRX100H

  • ebay.comにて海外から購入。
    • 46000+2200税関の消費税
    • 電源ケーブルがEU向けだった
    • ACアダプタは日本でもOKなもの
    • 眼鏡口のケーブルのためそのへんのケーブルを差して起動確認


 mgd: error: Cannot open configuration file: /config/[[juniper]].conf
  mgd: warning: activating factory configuration
  mgd: commit complete
  Setting initial options:  debugger_on_panic=NO debugger_on_break=NO.
  Starting optional daemons:  usbd.
  Doing initial network setup:
  .
  Initial interface configuration:
  additional daemons: eventd.
  savecore: /dev/bo0s1b: No such file or directory
  savecore: Reboot reason(s): 0x1: power cycle/failure
  savecore: no dumps found
  Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot//kernel;/boot/modules;/modu
  Loading the DIALER driver
  les
  kld netpfe drv: ifpfed_dialer.
  Doing additional network setup:.
  Starting final network daemons:.
  setting ldconfig path: /usr/lib /opt/lib
  starting standard daemons: cron.
  Initial rc.mips initialization:.
  Local package initialization:.
  starting local daemons:.
  kern.securelevel: -1 -> 1
  Creating JAIL MFS partition...
  JAIL MFS partition created
  boot.upgrade.uboot="0xBFC00000"
  boot.upgrade.loader="0xBFE00000"
  Boot media /dev/da0 has dual root support
  ** /dev/da0s2a
  FILE SYSTEM CLEAN; SKIPPING CHECKS
  clean, 40896 free (8 frags, 5111 blocks, 0.0% fragmentation)
  Sat May 12 10:35:58 UTC 2012
  
  Amnesiac (ttyu0)
  
  login: root
  
  --- JUNOS 10.4R6.5 built 2011-07-23 11:18:23 UTC
  
  
  ********************************************************************
  ** Welcome to JUNOS:                                              **
  **                                                                **
  **     To run the console configuration wizard, please run the    **
  **     command 'config-wizard' at the 'root%' prompt.             **
  **                                                                **
  **     To enter the JUNOS CLI, please run the command 'cli'.      **
  **                                                                **
  ********************************************************************
  
  
  root@%

root@srx100h> show system alarms
1 alarms currently active
Alarm time               Class  Description
2012-05-12 19:36:09 JST  Minor  Rescue configuration is not set

root@srx100h> request system configuration rescue save

root@srx100h> show system alarms
No alarms currently active

設定




アップデート

root@srx100h> request system software add no-copy http://192.168.2.110/junos-srxsme-12.1R2.9-domestic.tgz
/var/tmp/incoming-package.1247                        1339 kB 1339 kBps
Package contains junos-12.1R2.9.tgz ; renaming ...
NOTICE: Validating configuration against junos-12.1R2.9.tgz.
NOTICE: Use the 'no-validate' option to skip this if desired.
Formatting alternate root (/dev/da0s2a)...
/dev/da0s2a: 297.9MB (610044 sectors) block size 16384, fragment size 2048
        using 4 cylinder groups of 74.47MB, 4766 blks, 9600 inodes.
super-block backups (for fsck -b #) at:
 32, 152544, 305056, 457568
Checking compatibility with configuration
Initializing...
Verified manifest signed by PackageProduction_10_4_0
Verified junos-10.4R6.5-domestic signed by PackageProduction_10_4_0
Using junos-12.1R2.9-domestic from /altroot/cf/packages/install-tmp/junos-12.1R2.9-domestic
Copying package ...
Verified manifest signed by PackageProduction_12_1_0
Hardware Database regeneration succeeded
Validating against /config/juniper.conf.gz
cp: /cf/var/validate/chroot/var/etc/resolv.conf and /etc/resolv.conf are identical (not copied).
cp: /cf/var/validate/chroot/var/etc/hosts and /etc/hosts are identical (not copied).
mgd: commit complete
Validation succeeded
Validating against /config/rescue.conf.gz
mgd: commit complete
Validation succeeded
Installing package '/altroot/cf/packages/install-tmp/junos-12.1R2.9-domestic' ...
Verified junos-boot-srxsme-12.1R2.9.tgz signed by PackageProduction_12_1_0
Verified junos-srxsme-12.1R2.9-domestic signed by PackageProduction_12_1_0
JUNOS 12.1R2.9 will become active at next reboot
WARNING: A reboot is required to load this software correctly
WARNING:     Use the 'request system reboot' command
WARNING:         when software installation is complete
Saving state for rollback ...

root@srx100h>
最終更新:2012年06月23日 23:13
ツールボックス

下から選んでください:

新しいページを作成する
ヘルプ / FAQ もご覧ください。