stuck "type bar"

http://www.google.com/patents?as_drrb_ap=q&as_minm_ap=0&as_miny_ap=&as_maxm_ap=0&as_maxy_ap=&as_drrb_is=b&as_minm_is=1&as_miny_is=1865&as_maxm_is=12&as_maxy_is=1925&dq=stuck%20%22type%20bar%22&q=stuck%20%20%22type%20bar%22&id=DcFEAAAAEBAJ&output=text&pg=PA2

stuck "type bar"

The object of making the enlargements beveled and the lower portion of the guide also beveled is to permit the ready entrance and centering of the type and to prevent the type cutting a shoulder in the guide, and 75 thus avoid all liability of the type getting stuck within the same during the operation of the machine.

By providing the type with an enlargement or making the type-body larger at or near its 80 base or below the character to co-operate with a guide having an opening widest or largest at that side at which the type enters, so as to form an abutment or stop for the enlargement, the following desiderata are gained: 85 The type may be more readily assembled or aligned than heretofore, and in writing the movement of the type through the guide is limited, and hence the type cannot go too far and get stuck or wedged, or punch through 90 the paper, or make too heavy an impression thereupon.

うーん、こりゃ関係ないかな、、

---

&link_trackback()　counter -