System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2002 by cisco Systems, Inc.
C2600 platform with 65536 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0xe994e4
Self decompressing the image :
###########################################################################################################################################################################################################################################################
[OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
000091 0X0008B800 C2600 single Ethernet
0X00098670 public buffer pools
0X00211000 public particle pools
TOTAL: 0X00334E70
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Rounded IOMEM up to: 4Mb.
Using 6 percent iomem. [4Mb/64Mb]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS5-M), Version 12.3(9), RELEASE SOFTWARE
(fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 14-May-04 14:37 by dchih
Image text-base: 0x80008098, data-base: 0x8190B5B4
cisco 2610 (MPC860) processor (revision 0x00) with 61440K/4096K bytes of
memory.
Processor board ID JAD064302IB (2090738098)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Press RETURN to get started!
*Mar 1 00:00:05.128: %LINEPROTO-5-UPDOWN: Line protocol on Interface
VoIP-Null0, changed state to up
*Mar 1 00:00:14.503: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to
up
*Mar 1 00:00:14.507: %LINK-3-UPDOWN: Interface Serial0/0, changed state to
down
*Mar 1 00:00:15.657: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Ethernet0/0, changed state to up
*Mar 1 00:00:15.657: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial0/0, changed state to down
*Mar 1 00:00:16.350: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:19.399: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS5-M), Version 12.3(9), RELEASE SOFTWARE
(fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 14-May-04 14:37 by dchih
*Mar 1 00:00:19.399: %SNMP-5-COLDSTART: SNMP agent on host RT011 is undergoing
a cold start
*Mar 1 00:00:20.401: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Ethernet0/0, changed state to down
RT011>
RT011>show ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IS5-M), Version 12.3(9), RELEASE SOFTWARE
(fc2)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 14-May-04 14:37 by dchih
Image text-base: 0x80008098, data-base: 0x8190B5B4
ROM: System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
RT011 uptime is 14 minutes
System returned to ROM by power-on
System image file is "flash:c2600-is5-mz.123-9.bin"
cisco 2610 (MPC860) processor (revision 0x00) with 61440K/4096K bytes of
memory.
Processor board ID JAD064302IB (2090738098)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
RT011>
