概要
※画像なし。
スペック表
1. APPLICATION:
This specification applies to the direct drive turntable unit DJ-U45
2. STANDARD
TEST CONDITION:
2-1 Ambient Temperature 20 +/- 2 degC
2-2 Relative Humidity 65% +/- 5%
NOTE: Measurements can be carried out between 5 degC to 35 degC and 45% to 85% relative humidity.
3. TURNTABLE SECTION:
3-1 Type
2-speed full manual
3-2 Motor
8pole,2phase,brushless DC motor
3-3 Driving Method
Direct drive
3-4 Turntable Platter
330mm dia. Aluminum diecast
3-5 Speeds
331/3 and 45rpm
3-6 Wow and Flutter
Less than 0.15% WRMS (JIS WTD) with 331/3 rpm
3-7 S/N Ratio
More than 55dB (DIN-B)
3-8 Pitch Controls
- /- 10%
3-9 Starting Torque
More than 1 kgf.cm
3-10 Braking System
Electronic brake
3-11 Starting Time
Less than 1 sec.
3-12 Braking Time
Less than 1 sec.
3-13 Time for Speed Change
Less than 1 sec. from 331/3 to 45 rpm.
Less than 1 sec. from 45 to 331/3 rpm.
3-14 High of cue(first track)
6~10 mm
3-15 Descend of cue
5 sec.
3-16 USB Function
USB rec. Function
A/D,D/A
16BIT 44.1KHz or 48KHz USB SELECTABLE
Computer interface
USB 1.1 COMPLIANT WINDOWS XP or MAC OSX
4. TONEARM SECTION:
4-1 Type
Static balanced straight shaped tone arm with cardan’s suspension
4-2 Effective Arm Length
220mm
4-3 Overhang
10mm
4-4 Tracking Error Angle
Less than 3 degree
4-5 Tracking Force Adjustment Range
3-4g
4-6 Applicable Cartridge Weight
6-10g
4-7 Phono Output Level
1.5~3.6 mV at 1KHz 5cm/sec (HP-4005)
4-8 Line Output Level
90~216mV at 1KHz 5cm/sec (HP-4005)
4-9 Frequency Response
20Hz-20KHz
4-10 Channel Separation
More than 15 dB
4-11 Channel Balance
Within 2.5dB at 1KHz
5. EQ AMP:
5-1 Output 150mV +/-4dB (IN: 2.5 mV 1KHz)
5-2 RIAA 20Hz~20KHz +1/-3dB (IN: 1.5 mV 1KHz)
6. GENERAL SECTION:
6-1 Power Supply
AC 115/230V,50/60Hz
6-2 Power Consumption
10.5 Watts
6-3 Dimensions
450 (W) x 350 (D) x 139 (H) mm
6-4 Weight
4.62 Kgs
7. ACCESSORIES SUPPLIED
Instruction manual x 1
Headshell x 1, Cartridge x 1,
45 rpm adaptor x 1
Counter weight x 1, Platter x 1,
Slipmat x 1, RCA cable x 1,
USB cable x 1, DISC x 1
最終更新:2019年02月18日 18:27