naobe @ ウィキ
rc.sysinit
最終更新：
Bot(ページ名リンク)
-
view
初期化シェルに戻る
rc.sysinit
#!/bin/bash # # /etc/rc.d/rc.sysinit - run once at boot time # # Taken in part from Miquel van Smoorenburg's bcheckrc. # HOSTNAME=`/bin/hostname` HOSTTYPE=`uname -m` unamer=`uname -r` set -m #Jobコントロールをenable
#
# HOSTNAME, IPv6のON/OFF設定
#
# HOSTNAME, IPv6のON/OFF設定
#
if [ -f /etc/sysconfig/network ]; then
. /etc/sysconfig/network
fi
if [ -z "$HOSTNAME" -o "$HOSTNAME" = "(none)" ]; then
HOSTNAME=localhost
fi
/proc、/sysをマウント
if [ ! -e /proc/mounts ]; then
mount -n -t proc /proc /proc
mount -n -t sysfs /sys /sys >/dev/null 2>&1
fi
usbcoreモジュールをロード
if [ ! -d /proc/bus/usb ]; then
modprobe usbcore >/dev/null 2>&1 && mount -n -t usbfs /proc/bus/usb /proc/bus/usb
else
mount -n -t usbfs /proc/bus/usb /proc/bus/usb
fi
#
# umask設定
# ・group,otherへの書き込み権限不許可
# PATH環境変数の設定。ここでexportしているので、ログインシェルでexportしなくて良い。
# /etc/profile.d/lang.sh実行。LANG環境変数をexport
#
# umask設定
# ・group,otherへの書き込み権限不許可
# PATH環境変数の設定。ここでexportしているので、ログインシェルでexportしなくて良い。
# /etc/profile.d/lang.sh実行。LANG環境変数をexport
#
. /etc/init.d/functions
# Check SELinux status
selinuxfs="$(fstab_decode_str `LC_ALL=C [[awk]] '/ selinuxfs / { print $2 }' /proc/mounts`)"
SELINUX_STATE=
if [ -n "$selinuxfs" ] && [ "`cat /proc/self/attr/current`" != "kernel" ]; then
if [ -r "$selinuxfs/enforce" ] ; then
SELINUX_STATE=`cat "$selinuxfs/enforce"`
else
# assume enforcing if you can't read it
SELINUX_STATE=1
fi
fi
SELinux関連は省略
if [ -n "$SELINUX_STATE" -a -x /sbin/restorecon ] && LC_ALL=C fgrep -q " /dev " /proc/mounts ; the n
/sbin/restorecon -R /dev 2>/dev/null
fi
disable_selinux() {
echo $"*** Warning -- SELinux is active"
echo $"*** Disabling security enforcement for system recovery."
echo $"*** Run 'setenforce 1' to reenable."
echo "0" > "$selinuxfs/enforce"
}
relabel_selinux() {
if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
chvt 1
fi
# if /sbin/init is not labeled correctly this process is running in the
# wrong context, so a reboot will be reuired after relabel
REBOOTFLAG=`restorecon -v /sbin/init`
AUTORELABEL=
. /etc/selinux/config
if [ "$AUTORELABEL" = "0" ]; then
rm -f /.autorelabel
echo
echo $"*** Warning -- SELinux ${SELINUXTYPE} policy relabel is required. "
echo $"*** /etc/selinux/config indicates you want to manually fix labeling"
echo $"*** problems. Dropping you to a shell; the system will reboot"
echo $"*** when you leave the shell."
echo "0" > $selinuxfs/enforce
sulogin
echo $"Unmounting file systems"
umount -a
mount -n -o remount,ro /
echo $"Automatic reboot in progress."
reboot -f
else
echo
echo $"*** Warning -- SELinux ${SELINUXTYPE} policy relabel is required."
echo $"*** Relabeling could take a very long time, depending on file"
echo $"*** system size and speed of hard drives."
echo "0" > $selinuxfs/enforce
/sbin/fixfiles restore > /dev/null 2>&1
rm -f /.autorelabel
if [ ! -z "$REBOOTFLAG" ]; then
echo $"Automatic reboot in progress."
reboot -f
fi
echo $SELINUX_STATE > $selinuxfs/enforce
if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
chvt 8
fi
fi
}
key_is_random() {
[ "$1" = "/dev/urandom" -o "$1" = "/dev/hw_random" \
-o "$1" = "/dev/random" ]
}
# Because of a chicken/egg problem, init_crypto must be run twice. /var may be
# encrypted but /var/lib/random-seed is needed to initialize swap.
init_crypto() {
local have_random dst src key opt mode owner params makeswap skip arg opt
local param value rc ret mke2fs mdir
ret=0
have_random=$1
while read dst src key opt; do
[ -z "$dst" -o "${dst#\#}" != "$dst" ] && continue
[ -b "/dev/mapper/$dst" ] && continue;
if [ "$have_random" = 0 ] && key_is_random "$key"; then
continue
fi
if [ -n "$key" -a "x$key" != "xnone" ]; then
if test -e "$key" ; then
owner=$(ls -l $key | (read a b owner rest; echo $owner))
if ! key_is_random "$key"; then
mode=$(ls -l "$key" | cut -c 5-10)
if [ "$mode" != "------" ]; then
echo $"INSECURE MODE FOR $key"
fi
fi
if [ "$owner" != root ]; then
echo $"INSECURE OWNER FOR $key"
fi
else
echo $"Key file for $dst not found, skipping"
ret=1
continue
fi
else
key=""
fi
params=""
makeswap=""
mke2fs=""
skip=""
# Parse the src field for UUID= and convert to real device names
if [ "${src%%=*}" == "UUID" ]; then
src=$(/sbin/blkid -t "$src" -l -o device)
elif [ "${src/^\/dev\/disk\/by-uuid\/}" != "$src" ]; then
src=$(__readlink $src)
fi
# Parse the options field, convert to cryptsetup parameters
# and contruct the command line
while [ -n "$opt" ]; do
arg=${opt%%,*}
opt=${opt##$arg}
opt=${opt##,}
param=${arg%%=*}
value=${arg##$param=}
case "$param" in
cipher)
params="$params -c $value"
if [ -z "$value" ]; then
echo $"$dst: no value for cipher option, skipping"
skip="yes"
fi
;;
size)
params="$params -s $value"
if [ -z "$value" ]; then
echo $"$dst: no value for size option, skipping"
skip="yes"
fi
;;
hash)
params="$params -h $value"
if [ -z "$value" ]; then
echo $"$dst: no value for hash option, skipping"
skip="yes"
fi
;;
verify)
params="$params -y"
;;
swap)
makeswap=yes
;;
tmp)
mke2fs=yes
esac
done
if [ "$skip" = "yes" ]; then
ret=1
continue
fi
if [ -z "$key" -a -x /usr/bin/rhgb-client ] \
&& /usr/bin/rhgb-client --ping ; then
chvt 1
fi
if cryptsetup isLuks "$src" 2>/dev/null; then
if key_is_random "$key"; then
echo $"$dst: LUKS requires non-random key, skipping"
ret=1
continue
fi
if [ -n "$params" ]; then
echo "$dst: options are invalid for LUKS partitions," \
"ignoring them"
fi
/sbin/cryptsetup ${key:+-d $key} luksOpen "$src" "$dst" <&1
else
/sbin/cryptsetup $params ${key:+-d $key} create "$dst" "$src" <&1
fi
rc=$?
if [ -z "$key" -a -x /usr/bin/rhgb-client ] \
&& /usr/bin/rhgb-client --ping ; then
chvt 8
fi
if [ $rc -ne 0 ]; then
ret=1
continue
fi
if [ -b "/dev/mapper/$dst" ]; then
if [ "$makeswap" = "yes" ]; then
mkswap "/dev/mapper/$dst" 2>/dev/null >/dev/null
fi
if [ "$mke2fs" = "yes" ]; then
if mke2fs "/dev/mapper/$dst" 2>/dev/null >/dev/null \
&& mdir=$(mktemp -d /tmp/mountXXXXXX); then
mount "/dev/mapper/$dst" "$mdir" && chmod 1777 "$mdir"
umount "$mdir"
rmdir "$mdir"
fi
fi
fi
done < /etc/crypttab
return $ret
}
if [ -x /sbin/setsysfont -a -c /dev/tty1 ]; then
/sbin/setsysfont < /dev/tty1 > /dev/tty1 2>/dev/null
fi
# Print a text banner.
echo -en $"\t\tWelcome to "
read -r redhat_release < /etc/redhat-release
if [[ "$redhat_release" =~ "Red Hat" ]]; then
[ "$BOOTUP" = "color" ] && echo -en "\\033[0;31m"
echo -en "Red Hat"
[ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
PRODUCT=`[[sed]] "s/Red Hat \(.*\) release.*/\1/" /etc/redhat-release`
echo " $PRODUCT"
elif [[ "$redhat_release" =~ "Fedora" ]]; then
[ "$BOOTUP" = "color" ] && echo -en "\\033[0;34m"
echo -en "Fedora"
[ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
PRODUCT=`sed "s/Fedora \(.*\) release.*/\1/" /etc/redhat-release`
echo " $PRODUCT"
elif [[ "$redhat_release" =~ "CentOS" ]]; then
[ "$BOOTUP" = "color" ] && echo -en "\\033[0;36m"
PRODUCT=`sed "s/CentOS \(.*\) release.*/\1/" /etc/redhat-release`
echo -e " $PRODUCT"
[ "$BOOTUP" = "color" ] && echo -en "\\033[0;39m"
else
PRODUCT=`sed "s/ release.*//g" /etc/redhat-release`
echo "$PRODUCT"
fi
if [ "$PROMPT" != "no" ]; then
echo -en $"\t\tPress 'I' to enter interactive startup."
echo
fi
#
# /usr/bin/rhgb-client --update="$1" を実行。
# グラフィックブートシステムを起動？？
#
# /usr/bin/rhgb-client --update="$1" を実行。
# グラフィックブートシステムを起動？？
#
# Set the system clock.
update_boot_stage RCclock
ARC=0
SRM=0
UTC=0
if [ -f /etc/sysconfig/clock ]; then
. /etc/sysconfig/clock
# convert old style clock config to new values
if [ "${CLOCKMODE}" = "GMT" ]; then
UTC=true
elif [ "${CLOCKMODE}" = "ARC" ]; then
ARC=true
fi
fi
CLOCKDEF=""
CLOCKFLAGS="$CLOCKFLAGS --hctosys"
case "$UTC" in
yes|true) CLOCKFLAGS="$CLOCKFLAGS --utc"
CLOCKDEF="$CLOCKDEF (utc)" ;;
no|false) CLOCKFLAGS="$CLOCKFLAGS --localtime"
CLOCKDEF="$CLOCKDEF (localtime)" ;;
esac
case "$ARC" in
yes|true) CLOCKFLAGS="$CLOCKFLAGS --arc"
CLOCKDEF="$CLOCKDEF (arc)" ;;
esac
case "$SRM" in
yes|true) CLOCKFLAGS="$CLOCKFLAGS --srm"
CLOCKDEF="$CLOCKDEF (srm)" ;;
esac
#
# ハードウェアクロックにUTC/localtimeを設定する
#
# ハードウェアクロックにUTC/localtimeを設定する
#
[ -x /sbin/hwclock ] && /sbin/hwclock $CLOCKFLAGS
action $"Setting clock $CLOCKDEF: `date`" /bin/true
# Fix console loglevel
if [ -n "$LOGLEVEL" ]; then
/bin/dmesg -n $LOGLEVEL
fi
#
# cmdline : ro root=/dev/VolGroup00/LogVol00 rhgb quiet i8042.noloop
#
# Only read this once.
cmdline=$(cat /proc/cmdline)
#
# /proc/sys/kernel/modprobeへ「モジュールをロードするプログラム」を書き込み。
#
# /proc/sys/kernel/modprobeへ「モジュールをロードするプログラム」を書き込み。
#
# Initialize hardware
if [ -f /proc/sys/kernel/modprobe ]; then
if ! strstr "$cmdline" nomodules && [ -f /proc/modules ] ; then
sysctl -w kernel.modprobe="/sbin/modprobe" >/dev/null 2>&1
else
# We used to set this to NULL, but that causes 'failed to exec' messages"
sysctl -w kernel.modprobe="/bin/true" >/dev/null 2>&1
fi
fi
touch /dev/.in_sysinit >/dev/null 2>&1
#
# initに対してデフォルトアフィニティ（CPUへの親密度 どのCPUを使用するか）を設定する
# -p 00000001 ならCPU0のみ使用
#
# initに対してデフォルトアフィニティ（CPUへの親密度 どのCPUを使用するか）を設定する
# -p 00000001 ならCPU0のみ使用
#
# Set default affinity
if [ -x /bin/taskset ]; then
if strstr "$cmdline" default_affinity= ; then
for arg in $cmdline ; do
if [ "${arg##default_affinity=}" != "${arg}" ]; then
/bin/taskset -p ${arg##default_affinity=} 1
fi
done
fi
fi
nashpid=$(pidof nash 2>/dev/null)
[ -n "$nashpid" ] && kill $nashpid >/dev/null 2>&1
unset nashpid
/sbin/start_udev
# Load other user-defined modules
for file in /etc/sysconfig/modules/*.modules ; do
[ -x $file ] && $file
done
# Load modules (for backward compatibility with VARs)
if [ -f /etc/rc.modules ]; then
/etc/rc.modules
fi
# Start the graphical boot, if necessary; /usr may not be mounted yet, so we
# may have to do this again after mounting
RHGB_STARTED=0
mount -n /dev/pts >/dev/null 2>&1
[ -n "$SELINUX_STATE" ] && restorecon /dev/pts >/dev/null 2>&1
if strstr "$cmdline" rhgb && ! strstr "$cmdline" early-login && [ "$BOOTUP" = "color" -a "$GRAPHIC AL" = "yes" -a -x /usr/bin/rhgb ]; then
( . /etc/sysconfig/i18n 2>/dev/null ; /usr/bin/rhgb )
RHGB_STARTED=1
fi
# Configure kernel parameters
update_boot_stage RCkernelparam
#
# カーネルパラメータの設定
#
# カーネルパラメータの設定
#
sysctl -e -p /etc/sysctl.conf >/dev/null 2>&1
#
# キーボード変換テーブルのロード
# loadkeys -u jp106.map
#
# キーボード変換テーブルのロード
# loadkeys -u jp106.map
#
if [ -x /bin/loadkeys ]; then
KEYTABLE=
KEYMAP=
if [ -f /etc/sysconfig/console/default.kmap ]; then
KEYMAP=/etc/sysconfig/console/default.kmap
else
if [ -f /etc/sysconfig/keyboard ]; then
. /etc/sysconfig/keyboard
fi
if [ -n "$KEYTABLE" -a -d "/lib/kbd/keymaps" ]; then
KEYMAP="$KEYTABLE.map"
fi
fi
if [ -n "$KEYMAP" ]; then
if [ -n "$KEYTABLE" ]; then
echo -n $"Loading default keymap ($KEYTABLE): "
else
echo -n $"Loading default keymap: "
fi
LOADKEYS=loadkeys
if [ "${LANG}" != "${LANG%%.UTF-8}" -o "${LANG}" != "${LANG%%.utf8}" ]; then
LOADKEYS="loadkeys -u"
fi
$LOADKEYS $KEYMAP < /dev/tty0 > /dev/tty0 2>/dev/null && \
success $"Loading default keymap" || failure $"Loading default keymap"
echo
fi
fi
#
# ホスト名の設定
#
# ホスト名の設定
#
# Set the hostname.
update_boot_stage RChostname
action $"Setting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
# Initialize ACPI bits
if [ -d /proc/acpi ]; then
for module in /lib/modules/$unamer/kernel/drivers/acpi/* ; do
module=${module##*/}
module=${module%.ko}
modprobe $module >/dev/null 2>&1
done
fi
# RAID setup
update_boot_stage RCraid
[ -x /sbin/nash ] && echo "raidautorun /dev/md0" | nash --quiet
if [ -f /etc/mdadm.conf ]; then
/sbin/mdadm -A -s
fi
# Device mapper & related initialization
if ! LC_ALL=C fgrep -q "device-mapper" /proc/devices 2>/dev/null ; then
modprobe dm-mod >/dev/null 2>&1
fi
mkdir -p /dev/mapper >/dev/null 2>&1
mknod /dev/mapper/control c \
$(awk '/ misc$/ { print $1 }' /proc/devices) \
$(awk '/ device-mapper$/ { print $1 }' /proc/misc) >/dev/null 2>&1
[ -n "$SELINUX_STATE" ] && restorecon /dev/mapper /dev/mapper/control >/dev/null 2>&1
if [ -f /etc/crypttab ]; then
s=$"Starting disk encryption:"
echo "$s"
init_crypto 0 && success "$s" || failure "$s"
echo
fi
if [ -c /dev/mapper/control ]; then
if ! strstr "$cmdline" nompath && [ -f /etc/multipath.conf -a \
-x /sbin/multipath.static ]; then
modprobe dm-multipath > /dev/null 2>&1
/sbin/multipath.static -v 0
if [ -x /sbin/kpartx ]; then
/sbin/dmsetup ls --target multipath --exec "/sbin/kpartx -a -p p"
fi
fi
if ! strstr "$cmdline" nodmraid && [ -x /sbin/dmraid.static ]; then
modprobe dm-mirror >/dev/null 2>&1
for x in $(/sbin/dmraid.static -ay -i -p -t 2>/dev/null | \
egrep -iv "^no " | \
awk -F ':' '{ print $1 }') ; do
dmname=$(resolve_dm_name $x)
[ -z "$dmname" ] && continue
/sbin/dmraid.static -ay -i -p "$dmname" >/dev/null 2>&1
/sbin/kpartx -a -p p "/dev/mapper/$dmname"
done
fi
if [ -x /sbin/lvm.static ]; then
action $"Setting up Logical Volume Management:" /sbin/lvm.static vgchange -a y --ignoreloc kingfailure
fi
fi
/etc/crypttabはないので無視
if [ -f /etc/crypttab ]; then
s=$"Starting disk encryption:"
echo "$s"
init_crypto 0 && success "$s" || failure "$s"
echo
fi
/fastbootはないので無視
if [ -f /fastboot ] || strstr "$cmdline" fastboot ; then
fastboot=yes
fi
if [ -f /fsckoptions ]; then
fsckoptions=`cat /fsckoptions`
fi
if [ -f /forcefsck ] || strstr "$cmdline" forcefsck ; then
fsckoptions="-f $fsckoptions"
elif [ -f /.autofsck ]; then
[ -f /etc/sysconfig/autofsck ] && . /etc/sysconfig/autofsck
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
fi
if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
echo
echo $"*** Warning -- the system did not shut down cleanly. "
echo $"*** Dropping you to a shell; the system will continue"
echo $"*** when you leave the shell."
[ -n "$SELINUX_STATE" ] && echo "0" > $selinuxfs/enforce
sulogin
[ -n "$SELINUX_STATE" ] && echo "1" > $selinuxfs/enforce
fi
fsckoptions="$AUTOFSCK_OPT $fsckoptions"
fi
if [ "$BOOTUP" = "color" ]; then
fsckoptions="-C $fsckoptions"
else
fsckoptions="-V $fsckoptions"
fi
READONLY=
if [ -f /etc/sysconfig/readonly-root ]; then
. /etc/sysconfig/readonly-root
fi
if strstr "$cmdline" readonlyroot ; then
READONLY=yes
[ -z "$RW_MOUNT" ] && RW_MOUNT=/var/lib/stateless/writable
fi
if strstr "$cmdline" noreadonlyroot ; then
READONLY=no
fi
$READONLYはnoなので無視
if [ "$READONLY" = "yes" -o "$TEMPORARY_STATE" = "yes" ]; then
mount_empty() {
if [ -e "$1" ]; then
echo "$1" | cpio -p -vd "$RW_MOUNT" &>/dev/null
mount -n --bind "$RW_MOUNT$1" "$1"
fi
}
mount_dirs() {
if [ -e "$1" ]; then
mkdir -p "$RW_MOUNT$1"
# fixme: find is bad
find "$1" -type d -print0 | cpio -p -0vd "$RW_MOUNT" &>/dev/null
mount -n --bind "$RW_MOUNT$1" "$1"
fi
}
mount_files() {
if [ -e "$1" ]; then
cp -a --parents "$1" "$RW_MOUNT"
mount -n --bind "$RW_MOUNT$1" "$1"
fi
}
# Common mount options for scratch space regardless of
# type of backing store
mountopts=
# Scan partitions for local scratch storage
rw_mount_dev=$(blkid -t LABEL="$RW_LABEL" -l -o device)
# First try to mount scratch storage from /etc/fstab, then any
# partition with the proper label. If either succeeds, be sure
# to wipe the scratch storage clean. If both fail, then mount
# scratch storage via tmpfs.
if mount $mountopts "$RW_MOUNT" > /dev/null 2>&1 ; then
rm -rf "$RW_MOUNT" > /dev/null 2>&1
elif [ x$rw_mount_dev != x ] && mount $rw_mount_dev $mountopts "$RW_MOUNT" > /dev/null 2>&1; t hen
rm -rf "$RW_MOUNT" > /dev/null 2>&1
else
mount -n -t tmpfs $mountopts none "$RW_MOUNT"
fi
for file in /etc/rwtab /etc/rwtab.d/* ; do
is_ignored_file "$file" && continue
[ -f $file ] && cat $file | while read type path ; do
case "$type" in
empty)
mount_empty $path
;;
files)
mount_files $path
;;
dirs)
mount_dirs $path
;;
*)
;;
esac
[ -n "$SELINUX_STATE" -a -e "$path" ] && restorecon -R "$path"
done
done
# In theory there should be no more than one network interface active
# this early in the boot process -- the one we're booting from.
# Use the network address to set the hostname of the client. This
# must be done even if we have local storage.
ipaddr=
if [ "$HOSTNAME" = "localhost" -o "$HOSTNAME" = "localhost.localdomain" ]; then
ipaddr=$(ip addr show to 0/0 scope global | awk '/[[:space:]]inet / { print gensub("/.*"," ","g",$2) }')
if [ -n "$ipaddr" ]; then
eval $(ipcalc -h $ipaddr 2>/dev/null)
hostname ${HOSTNAME}
fi
fi
# Clients with read-only root filesystems may be provided with a
# place where they can place minimal amounts of persistent
# state. SSH keys or puppet certificates for example.
#
# Ideally we'll use puppet to manage the state directory and to
# create the bind mounts. However, until that's all ready this
# is sufficient to build a working system.
# First try to mount persistent data from /etc/fstab, then any
# partition with the proper label, then fallback to NFS
state_mount_dev=$(blkid -t LABEL="$STATE_LABEL" -l -o device)
if mount $mountopts $STATE_OPTIONS "$STATE_MOUNT" > /dev/null 2>&1 ; then
/bin/true
elif [ x$state_mount_dev != x ] && mount $state_mount_dev $mountopts "$STATE_MOUNT" > /dev/nul l 2>&1; then
/bin/true
elif [ ! -z "$CLIENTSTATE" ]; then
# No local storage was found. Make a final attempt to find
# state on an NFS server.
mount -t nfs $CLIENTSTATE/$HOSTNAME $STATE_MOUNT -o rw,nolock
fi
if [ -d $STATE_MOUNT/etc ]; then
# Copy the puppet CA's cert from the r/o image into the
# state directory so that we can create a bind mount on
# the ssl directory for storing the client cert. I'd really
# rather have a unionfs to deal with this stuff
cp --parents -f -p /var/lib/puppet/ssl/certs/ca.pem $STATE_MOUNT 2>/dev/null
# In the future this will be handled by puppet
for i in $(grep -v "^#" $STATE_MOUNT/files); do
if [ -e $i ]; then
mount -n -o bind $STATE_MOUNT/${i} ${i}
fi
done
fi
fi
if ! [[ " $fsckoptions" =~ " -y" ]]; then
fsckoptions="-a $fsckoptions"
fi
_RUN_QUOTACHECK=0
if [ -f /forcequotacheck ] || strstr "$cmdline" forcequotacheck ; then
_RUN_QUOTACHECK=1
fi
ファイルシステムチェック開始
/etc/fstabのデバイス全て
/etc/fstabのデバイス全て
if [ -z "$fastboot" -a "$READONLY" != "yes" ]; then
STRING=$"Checking filesystems"
echo $STRING
if [ "${RHGB_STARTED}" != "0" -a -w /etc/rhgb/temp/rhgb-console ]; then
fsck -T -t noopts=_netdev -A $fsckoptions > /etc/rhgb/temp/rhgb-console
else
fsck -T -t noopts=_netdev -A $fsckoptions
fi
rc=$?
if [ "$rc" -eq "0" ]; then
success "$STRING"
echo
elif [ "$rc" -eq "1" ]; then
passed "$STRING"
echo
elif [ "$rc" -eq "2" -o "$rc" -eq "3" ]; then
echo $"Unmounting file systems"
umount -a
mount -n -o remount,ro /
echo $"Automatic reboot in progress."
reboot -f
fi
# A return of 4 or higher means there were serious problems.
if [ $rc -gt 1 ]; then
if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
chvt 1
fi
failure "$STRING"
echo
echo
echo $"*** An error occurred during the file system check."
echo $"*** Dropping you to a shell; the system will reboot"
echo $"*** when you leave the shell."
str=$"(Repair filesystem)"
PS1="$str \# # "; export PS1
[ "$SELINUX_STATE" = "1" ] && disable_selinux
sulogin
echo $"Unmounting file systems"
umount -a
mount -n -o remount,ro /
echo $"Automatic reboot in progress."
reboot -f
elif [ "$rc" -eq "1" ]; then
_RUN_QUOTACHECK=1
fi
if [ -f /.autofsck -a -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
chvt 8
fi
fi
# Update quotas if necessary
if [ X"$_RUN_QUOTACHECK" = X1 -a -x /sbin/quotacheck ]; then
if [ -x /sbin/convertquota ]; then
# try to convert old quotas
for mountpt in `LC_ALL=C awk '$4 ~ /quota/{print $2}' /etc/mtab` ; do
mountpt="$(fstab_decode_str "$mountpt")"
if [ -f "$mountpt/quota.user" ]; then
action $"Converting old user quota files: " \
/sbin/convertquota -u "$mountpt" && \
rm -f "$mountpt/quota.user"
fi
if [ -f "$mountpt/quota.group" ]; then
action $"Converting old group quota files: " \
/sbin/convertquota -g "$mountpt" && \
rm -f "$mountpt/quota.group"
fi
done
fi
action $"Checking local filesystem quotas: " /sbin/quotacheck -aRnug
fi
remount_needed() {
local state oldifs
[ "$READONLY" = "yes" ] && return 1
state=`LC_ALL=C awk '/ \/ / && ($3 !~ /rootfs/) { print $4 }' /proc/mounts`
oldifs=$IFS
IFS=","
for opt in $state ; do
if [ "$opt" = "rw" ]; then
IFS=$oldifs
return 1
fi
done
IFS=$oldifs
return 0
}
# Remount the root filesystem read-write.
update_boot_stage RCmountfs
if remount_needed ; then
action $"Remounting root filesystem in read-write mode: " mount -n -o remount,rw /
fi
# Clean up SELinux labels
if [ -n "$SELINUX_STATE" ]; then
restorecon /etc/mtab /etc/ld.so.cache /etc/blkid/blkid.tab /etc/resolv.conf >/dev/null 2>&1
fi
if [ "$READONLY" != "yes" ] ; then
# Clear mtab
(> /etc/mtab) &> /dev/null
# Remove stale backups
rm -f /etc/mtab~ /etc/mtab~~
/etc/mtabに書き込み
# Enter mounted filesystems into /etc/mtab
mount -f /
mount -f /proc >/dev/null 2>&1
mount -f /sys >/dev/null 2>&1
mount -f /dev/pts >/dev/null 2>&1
mount -f /proc/bus/usb >/dev/null 2>&1
fi
マウント開始
# Mount all other filesystems (except for NFS and /proc, which is already
# mounted). Contrary to standard usage,
# filesystems are NOT unmounted in single user mode.
if [ "$READONLY" != "yes" ] ; then
action $"Mounting local filesystems: " mount -a -t nonfs,nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_ netdev
else
action $"Mounting local filesystems: " mount -a -n -t nfs4,smbfs,ncpfs,cifs,gfs,gfs2 -O no_net dev
fi
if [ -x /sbin/quotaon ]; then
action $"Enabling local filesystem quotas: " /sbin/quotaon -aug
fi
# Check to see if a full relabel is needed
if [ -n "$SELINUX_STATE" -a "$READONLY" != "yes" ]; then
if [ -f /.autorelabel ] || strstr "$cmdline" autorelabel ; then
relabel_selinux
fi
else
if [ -d /etc/selinux -a "$READONLY" != "yes" ]; then
[ -f /.autorelabel ] || touch /.autorelabel
fi
fi
# Start the graphical boot, if necessary and not done yet.
if strstr "$cmdline" rhgb && ! strstr "$cmdline" early-login && [ "$RHGB_STARTED" -eq 0 -a "$BOOTU P" = "color" -a "$GRAPHICAL" = "yes" -a -x /usr/bin/rhgb ]; then
( . /etc/sysconfig/i18n 2>/dev/null ; /usr/bin/rhgb )
RHGB_STARTED=1
fi
# Initialize pseudo-random number generator
if [ -f "/var/lib/random-seed" ]; then
cat /var/lib/random-seed > /dev/urandom
else
[ "$READONLY" != "yes" ] && touch /var/lib/random-seed
fi
if [ "$READONLY" != "yes" ]; then
chmod 600 /var/lib/random-seed
dd if=/dev/urandom of=/var/lib/random-seed count=1 bs=512 2>/dev/null
fi
# Use the hardware RNG to seed the entropy pool, if available
#[ -x /sbin/rngd -a -c /dev/hw_random ] && rngd
if [ -f /etc/crypttab ]; then
s=$"Starting disk encryption using the RNG:"
echo "$s"
init_crypto 1 && success "$s" || failure "$s"
echo
fi
# Configure machine if necessary.
if [ -f /.unconfigured ]; then
if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
chvt 1
fi
if [ -x /usr/bin/system-config-keyboard ]; then
/usr/bin/system-config-keyboard
fi
if [ -x /usr/bin/passwd ]; then
/usr/bin/passwd root
fi
if [ -x /usr/sbin/system-config-network-tui ]; then
/usr/sbin/system-config-network-tui
fi
if [ -x /usr/sbin/timeconfig ]; then
/usr/sbin/timeconfig
fi
if [ -x /usr/sbin/authconfig-tui ]; then
/usr/sbin/authconfig-tui --nostart
fi
if [ -x /usr/sbin/ntsysv ]; then
/usr/sbin/ntsysv --level 35
fi
# Reread in network configuration data.
if [ -f /etc/sysconfig/network ]; then
. /etc/sysconfig/network
# Reset the hostname.
action $"Resetting hostname ${HOSTNAME}: " hostname ${HOSTNAME}
fi
rm -f /.unconfigured
if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
chvt 8
fi
fi
# Clean out /.
rm -f /fastboot /fsckoptions /forcefsck /.autofsck /forcequotacheck /halt \
/poweroff /.suspended &> /dev/null
# Do we need (w|u)tmpx files? We don't set them up, but the sysadmin might...
_NEED_XFILES=
[ -f /var/run/utmpx -o -f /var/log/wtmpx ] && _NEED_XFILES=1
# Clean up /var. I'd use find, but /usr may not be mounted.
for afile in /var/lock/* /var/run/* ; do
if [ -d "$afile" ]; then
case "$afile" in
*/news|*/mon) ;;
*/sudo) rm -f $afile/*/* ;;
*/vmware) rm -rf $afile/*/* ;;
*/samba) rm -rf $afile/*/* ;;
*/screen) rm -rf $afile/* ;;
*/cvs) rm -rf $afile/* ;;
*/dovecot) rm -f $afile/*/* ;;
*/cups) rm -f $afile/*/* ;;
*/libvirt) rm -rf $afile/*/* ;;
*) rm -f $afile/* ;;
esac
else
rm -f $afile
fi
done
rm -f /var/lib/rpm/__db* &> /dev/null
rm -f /var/gdm/.gdmfifo &> /dev/null
# Reset pam_console permissions
[ -x /sbin/pam_console_apply ] && /sbin/pam_console_apply -r
{
# Clean up utmp/wtmp
> /var/run/utmp
touch /var/log/wtmp
chgrp utmp /var/run/utmp /var/log/wtmp
chmod 0664 /var/run/utmp /var/log/wtmp
if [ -n "$_NEED_XFILES" ]; then
> /var/run/utmpx
touch /var/log/wtmpx
chgrp utmp /var/run/utmpx /var/log/wtmpx
chmod 0664 /var/run/utmpx /var/log/wtmpx
fi
# Clean up various /tmp bits
[ -n "$SELINUX_STATE" ] && restorecon /tmp
rm -f /tmp/.X*-lock /tmp/.lock.* /tmp/.gdm_socket /tmp/.s.PGSQL.*
rm -rf /tmp/.X*-unix /tmp/.ICE-unix /tmp/.font-unix /tmp/hsperfdata_* \
/tmp/kde-* /tmp/ksocket-* /tmp/mc-* /tmp/mcop-* /tmp/orbit-* \
/tmp/scrollkeeper-* /tmp/[[ssh]]-* \
/dev/.in_sysinit
# Make ICE directory
mkdir -m 1777 -p /tmp/.ICE-unix >/dev/null 2>&1
chown root:root /tmp/.ICE-unix
[ -n "$SELINUX_STATE" ] && restorecon /tmp/.ICE-unix >/dev/null 2>&1
#if [ -x /etc/init.d/diskdump ]; then
# /etc/init.d/diskdump swapsavecore
#fi
swapを有効にする
# Start up swapping.
update_boot_stage RCswap
action $"Enabling /etc/fstab swaps: " swapon -a -e
if [ "$AUTOSWAP" = "yes" ]; then
curswap=$(awk '/^\/dev/ { print $1 }' /proc/swaps | while read x; do get_numeric_dev dec $x ; echo -n " "; done)
swappartitions=$(blkid -t TYPE=swap -o device)
if [ x"$swappartitions" != x ]; then
for partition in $swappartitions ; do
[ ! -e $partition ] && continue
majmin=$(get_numeric_dev dec $partition)
echo $curswap | grep -qw "$majmin" || action $"Enabling local swap partitions: " swapo n $partition
done
fi
fi
# Set up binfmt_misc
/bin/mount -t binfmt_misc none /proc/sys/fs/binfmt_misc > /dev/null 2>&1
# Initialize the serial ports.
if [ -f /etc/rc.serial ]; then
. /etc/rc.serial
fi
# If they asked for ide-scsi, load it
if strstr "$cmdline" ide-scsi ; then
modprobe ide-cd >/dev/null 2>&1
modprobe ide-scsi >/dev/null 2>&1
fi
# Boot time profiles. Yes, this should be somewhere else.
if [ -x /usr/sbin/system-config-network-cmd ]; then
if strstr "$cmdline" netprofile= ; then
for arg in $cmdline ; do
if [ "${arg##netprofile=}" != "${arg}" ]; then
/usr/sbin/system-config-network-cmd --profile ${arg##netprofile=}
fi
done
fi
fi
# Now that we have all of our basic modules loaded and the kernel going,
# let's dump the syslog ring somewhere so we can find it later
dmesg -s 131072 > /var/log/dmesg
# create the crash indicator flag to warn on crashes, offer fsck with timeout
touch /.autofsck &> /dev/null
if [ "$PROMPT" != no ]; then
while :; do
pid=$(/sbin/pidof getkey)
[ -n "$pid" -o -e /var/run/getkey_done ] && break
usleep 100000
done
[ -n "$pid" ] && kill -TERM "$pid" >/dev/null 2>&1
fi
} &
if strstr "$cmdline" confirm ; then
touch /var/run/confirm
fi
if [ "$PROMPT" != "no" ]; then
/sbin/getkey i && touch /var/run/confirm
touch /var/run/getkey_done
fi
wait
[ "$PROMPT" != no ] && rm -f /var/run/getkey_done
# Let rhgb know that we're leaving rc.sysinit
if [ -x /usr/bin/rhgb-client ] && /usr/bin/rhgb-client --ping ; then
/usr/bin/rhgb-client --sysinit
fi
